Відео

Sweet! Well done.👍

Great vdo ty

Looks much better Adam 👌 Good job 👏

Hi Adam, What is the name brand of this 3rd function? It looks to be factory as it has the same joystick as stock with the 2 buttons. Is it an LS 3rd function? Dan

Adam, you need to wear a mask when you stain! Even if it’s outside! Take care of your lungs! And you should be wearing goggles! Otherwise, nice job on finishing your building! 😊

Great job, looks awesome! I really need to get me one of those battery nailers.

At least you put those shelves up high enough where no one but you could reach them.

You might take a look at the connection of DJI with the CCP and the potential ban on DJI drones.

How is your pound? I didn't see that until the end of the video.

Shelter looks great. It’s awesome to see you actually doing hand work. So many other channels don’t do any manual labor on camera and only play with their expensive equipment.

I know you have your sponsorship and all. But just run power to your shed. It's not that hard or expensive if you do it yourself. You'll be glad you did. The batteries sound like a good idea, but in reality they never hold up in the long term. And they don't do well in the winter. And they only get weaker as time goes on. You'll end up running power out there in a year or so anyway.

Sounds like DJI is one step closer to having the sale of their drones banned in the US.

Did you get that stone from Ralph or elsewhere? I need to redo my driveway.

U need a real set of saw horses

KUNTZ ENGINEERING MAKES THE BEST PULL BEHIND MOWERS IN PRO GRADE ACRE EASE MOWERS. EVEN THE FINISH CUT PRO GRADE MODELS CAN DO BETTER THAN BOTH OF THOSE THINGS YOU ARE USING. CHECK THEM OUT SERIOUSLY. I HAVE BEEN USING ACRE EASE MOWERS SINCE 2006 WITH 500 CC ATV AND CAN TURN VERY WELL AND GO AT A GOOD SPEED . THE ROUGH CUT MOWERS FROM ACRE EASE EVEN HAVE ELECTRIC DECKS TO RAISE AND LOWER BLADE DECK

Most impressive, Adam, the three pull ups. So you also work out regularly.

Great property Adam. Might be time to get Chris from LetsDig18 in for the pond. Best of luck.

Adam i just wanted to commend you in your camera work and editing. The footage while spreading the stone was fantastic, excellent angle shots and very professional. Ive been watching you from the start and you have just been getting better and better.

Great video!!! The power stations are Great!! Stay Hydrated and Have a Safe Day

You could frame another shelf half way down angled supports, would work great for paint cans or similarly sized items.

Looking good!

Finishing projects is always a bittersweet moment for myself. I enjoyed the journey, but at the same time when it's done it's always a relief. Good thing my project will keep me busy for a few years I hope 😂

Fill it in and build a bigger shop

I'll bet a mask would have been a nice touch before staining. Looking good Adam. Stay safe.

We're all invested in the damn pond. Haha.

That was a pretty cool semi trailer where you can move the rear axles closer towards the actual truck.

Cool! When are we getting 4k?? That would definitely represent the work quality

9:37 This suspiciously looks like a commercial for the "DJI Power 1000"! I enjoyed the video, either way.

Thanks for sharing!

One of the best free things that someone can do to support a UA-camr in the UA-cam algorithm click-through rate (CTR) is by clicking and playing the video, all the way through, the very first time you see any of their video thumbnails. Don't save it for later, play it through right away, and if you don't have time to actually watch it right then and there, save it to the watch it later playlist, and then go back and watch it again.

Rarely fails - trusses arrive weeks before needed or a day (2?😵‍💫) after!

Do you have a build video for this firewood stand? My other one I copied off you is starting to need repair/replacement.

Hello Adam. When you were cutting the sheets of OSB, you were concerned that you might cut the supports. If you had laid four 2X pieces of lumber across the supports, you could have ripped the sheeting without concerns.

Do your shorts ever get soaked from ass sweat? Not asking for a friend.

Nice job Adam, a check mark on the Adam to do list. Are you going to spray stain the new shelf, thought it might stand out with everything else being stained. Have a wonderful week. 😀👍👍👍

What's the angle calculator you used?

i was totally gonna joke about the peanut gallery is getting restless for a pond update( im one of them, lol ) Do you think that now you have all that clay trying a sealing polymer again might work?

Congratulations! You are the first on UA-cam to demonstrate how to properly pour liquid from a large container. Most people would have the spout on the bottom. Glug, glug and glug. Not so when it's on top. Bravo! The time stamp is 3:07 As for the pond update, I saw the pond from the drone shot. I'm updated. Still filling.

My Frontier OS18 Saw Mill is being delivered today. I have a lot of Southern Yellow Pine I can make into lumber. Tree service comes tomorrow to fell 5 trees. My Husqvarna Rancher 455 is going to get a workout for sure! What can't be made into lumber will be split for campfire wood. Video in a few days. And good job on the shed!

should have safety chains at hitch

The shed is great for "out of the weather" protection for those extra tools and toys. I have to wonder though - how comfortable you are with security of your property and valuables when you go away on vacations.

Adam, you raise the bar and make nice stuff.

Hi Adam! You got the checkered flag on this project! Excellent job as always. The only question I have since I have gray hair is, is there say a 2x10 or 12 pressure treated rim joist around the outside to keep the gravel in place? Dynamite job Adam! ❤😊

Certainly helps to be 6'5', no need for a stepladder when building the shelves

Git-R-Done! Unfinished jobs drive me CRAZY!!!

Wow, the lake looked way lower as it was passed! Ouch!

Adam, you have to be pleased with the way your property is shaping up. Hard work paying off. 👍

Very good video the only thing I saw is to move the file back a little when you are returning the file for another stroke, you should only be removing material in one direction, trying to remove material in both directions is not good for the chain and is terrible for the file.

Do you plan to get a step stool for Spicer to use to get up to the shelf?

Verry Nice Shed. You took the time to place your wood coulmns with cross bracing for stiffness on concrete piers so your wood support beams which will remain intact for quite a while. Burying wood columns/posts into the ground w/o using creosote (if still permitted/allowed in your area) impregnated posts will typicall degrade in about 10 years including pressure treated lumber. What I noticed and recommend is for all painting operations especially sprayed coatings you wear a dual element respirator, water based paints/coatings can be even more dangerous than petroleum based coatings as they can be absorbed much more readily than hydro carbon solvent based paints/stains/ waterproffings etc. and as vapor pressures are generally higher for water based coatings they tend to be less smelly giving one less natural warning of caustic nature of additive being sprayed/brushed on. Ray Stormont